TT30% as deposit, Balance before ship by TT;
TT30% as deposit, Balance by LC Sight irrevocable;

The production process of each of our parts is made in accordance with the strictest requirements. For example, the screws need to be rust-proofed, the cab needs to meet anti-tilt standards, and the painting of each part is made according to automobile paint.

We have operation instructions and inspection instructions for each process, and each part has inspection standards to ensure the overall quality of the equipment. When the equipment is installed, we have dedicated testers to test the equipment for at least 200 hours before leaving the factory to eliminate potential problems.

100 units.

I. Flexible steering mode
1. Three steering modes, including: Front wheel steering (default mode), four-wheel steering, crab mode
2. Switching through the shift switch
3. Small turning radius, suitable for working in narrow areas, with four wheel steering and a turning radius of 4m

II. The vehicle has been adjusted to adapt to off-road driving
1. The rear axle can adapt to ground swing, with a swing angle of ±5°;

III. The hydraulic control system, closed variable system + load sensitive system are energy-saving and environmentally friendly, and can be freely controlled
1. Mobile independent closed variable system, energy-saving;
2. The open load sensing system is adopted for on-car.

IV. The multifaceted electrical control protection is safe and reliable
1. Adding anti roll over limiters can alert and cut off on-car operations during excessive operations to prevent safety accidents;
2. Electronically controlled throttle, mobile with the ability to increase power with speed and exceed authority to handle off-road driving;
3. The on-car operation belt is equipped with the on-car stop button. If the operator accidentally releases their hand, the on-car operation will automatically stop

V. Driver's cab, spacious interior, luxurious atmosphere, wide view, multiple connected entertainment players, and multiple storage compartments
1. Luxury atmosphere;
2. Panoramic large arc front windshield, with open view and no dead corners;
3. Equipped with Bluetooth, USB interface player, and luxury audio;
4. Equipped with multiple storage bins, mobile phones and files can be placed freely.

VI. Braking system, which achieves reliable and safe braking through the dual circuit holding system
Energy storage braking is adopted with jog function

VII. Transmission system, equipped with various fractional reduction systems, with hydraulic free shifting and mechanical shifting
1. Mobile static pressure transmission, can drive smoothly;
2. Hydraulic control for high and low speeds, allowing for easy shifting of gears;
3. Mechanical high and low speed, suitable for driving in different road conditions.

VIII. Strong driving ability, excellent off-road and hill climbing ability

IX. Unique quick change method, equipped with multi-level hydraulic control safety protection system, various assistive devices are reliably connected, and can be adapted to various assistive devices.

X. For structures, finite element design and analysis are adopted to ensure safety factors

Our designers were all chief crane designers who had worked in Zoomlion for more than 10 years.

Our equipment has a one-year, 2,000-hour warranty since it leaves the factory, and we will provide warranty accessories worth 3,000 RMB. We have sufficient accessories. When customers need them, we can issue them within 5 working days.

One 40HQ of our 4-ton 7-meter telehandler can hold two units.
One 40HQ of our 4-ton 18-meter telehandler can be 1 set.

We usually export from Shanghai.