You are here: Home » Products » Telehandler » construction telehandler » HZTH5007, 5 Ton telehandler, 5 Ton 7 M Telehandler, 5 Ton 6 M Telehandler, Telehandler with Bucket, Telehandler with Fork, Telehandler with Working Platform

HZTH5007, 5 Ton telehandler, 5 Ton 7 M Telehandler, 5 Ton 6 M Telehandler, Telehandler with Bucket, Telehandler with Fork, Telehandler with Working Platform

telehandler 5 ton for Agricultural customers need Power Take Off (PTO), four wheel drive telehandler,
Russian customers need hydrostatic drive , Hydraulic systems require closed hydrostatic
Additional oil pipes are needed on the arm as the power source for the attachment.
5 Ton telehandler, 5 Ton 7 M Telehandler, 5 Ton 6 M Telehandler, Telehandler with Bucket, Telehandler with Fork, Telehandler with Working Platform
four wheel drive and four wheel steering 
cummins engine, Closed hydrostatic system, load limiter for safe
1200 mm fork quick change carrriers
Color:
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
  • HZTH5007

  • Hua Drill

The vehicle has been adjusted to adapt to off-road driving

The rear axle can adapt to ground swing, with a swing angle of ±5°

The hydraulic control system, closed variable system + load sensitive system are energy-saving and environmentally friendly, and can be freely controlled

Mobile independent closed variable system, energy-saving;

The open load sensing system is adopted for on-car.


What is telehandler or telescopic handler

A telescopic handler, also called a lull, telehandler, teleporter, reach forklift, or zoom boom, is a machine widely used in agriculture and industry. It is somewhat like a forklift but has a boom (telescopic cylinder), making it more a crane than a forklift, with the increased versatility of a single telescopic boom that can extend forwards and upwards from the vehicle. The boom can be fitted with different attachments, such as a bucket, pallet forks, muck grab, or winch.


with off-road tire



序号
S/N

性能项目名称
Name of performance project

性能或参数
Performance or parameters

备 注
Remarks

1.

外形尺寸
Outline dimension

长(mm)
Length (mm)

5150

拆除货叉
Remove the pallet fork

宽(mm)
Width (mm)

2250


高(mm)
Height (mm)

2300



2.

自重(kg)
Dead weight (kg)

8000


3.

液压系统压力(Mpa)
Hydraulic system pressure (MPa)

26


4.

液压系统流量(l/min)
Hydraulic system flow (l/min)

145


5.

液压油箱容积(l)
Hydraulic fuel tank capacity (l)

150


6.

发动机
Engine

型号
Model

QSB3.9-C110-30

国三
National Standard III

7.

功率(kw@rev)
Power (kw@rev)

81/2200


8.

扭矩(N@rev)
Torque (N@rev)

480/1600


9.

最大行走速度(km/h)
Maximum mobile speed (km/h)

25


10.

爬坡度(°)
Gradeability (º)

30%


11.

离去角(°)
Departure angle (º)

33


12.

后桥车架摆动角度(°)
Swing angle of rear axle frame (º)

5


13.

轮胎规格
Tire specification

16.70-20 or 16.70-24
16.70-20 or 16.70-24



5007



Previous: 
Next: 
  11th Floor, Comprehensive Building, No. 1320 Kaiyuan East Road, Xingsha Industrial Base, Changsha Economic and Technological Development Zone.

QUICK LINKS

ABOUT EM-INDUSTRY

At present, in terms of product research and development, Hua Drill has established close strategic partnerships with many channel partners.

CONTACT US

Email: info@telehandler.cn
International Sales: sales@telehandler.cn
International Whatsapp: 0086-13911513272
Domestic Sales: susannasun@telehandler.cn
Domestic Phone: 0086-18684833682
After service: Afterservice@telehandler.cn
Copyright  2023 Hunan Hua Drill Intelligent Technology Co., Ltd. Supported by leadongSitemap